NJ Transit ALP-45DP

The Bombardier ALP-45DP is a dual-mode locomotive used by NJ Transit to provide direct service from the unelectrified portions of its network to New York Penn Station.

Controls

Control desk

HeadlightSwitch

The headlight switch. Ranges from -1 to 1.

DitchLightsSwitch

The model position for the ditch lights switch. Ranges from -1 to 1.

DitchLights

The ditch lights click toggle, also operated by the J key. 0 = off, 1 = on.

CabLightSwitch

The model position for the cab light switch. Ranges from -1 to 1.

CabLight

The cab light click toggle, also operated by the L key. 0 = off, 1 = on.

InstrumentLightsSwitch

The model position for the instrument lights switch. Ranges from -1 to 1.

InstrumentLights

The instrument lights click toggle, also operated by the I key. 0 = off, 1 = on.

DeskLightSwitch

The model position for the desk light switch. Ranges from -1 to 1.

DeskLight

The desk light click toggle, also operated by the Ctrl+L key. 0 = off, 1 = on.

VirtualHorn

The horn plunger, also operated by the Spacebar. Plays the beginning of the horn sequence.

Horn

Plays the continuous horn sequence.

FaultReset

The fault reset button.

ThrottleAndBrake

The combined power and brake handle.

Regulator

The true throttle value used by the physics model.

DynamicBrake

The true dynamic braking value used by the physics model.

Reverser

The reverser lever. -1 = reverse, 0 = neutral, 1 = forward.

WipersSwitch

The model position for the wipers switch. Ranges from -1 to 1.

VirtualWipers

The wipers click toggle, also toggled with the V key.

Wipers

When set to 1, the wipers move and complete one cycle. Resets back to 0 after the animation completes.

SanderSwitch

The model position for the sander switch. Ranges from -1 to 1.

VirtualSander

The sander click toggle, also operated by the X key.

Sander

The true sander state used by the physics model.

BellSwitch

The model position for the bell switch. Ranges from -1 to 1.

VirtualBell

The bell click toggle, also operated by the B key.

Bell

The true bell state used by the physics model.

HandbrakeSwitch

The handbrake switch. Ranges from -1 to 1.

PantographSwitch

The pantograph switch. Ranges from -1 to 1.

VirtualBrake

The player's Expert Mode train brake control. Ranges from 0 to 1.

Value	Meaning
1.0	Emergency
0.8	Handle off
0.6	Service
0.4	Lap
0.2	E-Hold
0.0	Release

TrainBrakeControl

The true train brake control used by the physics model. Ranges from 0 to 1.

VirtualEngineBrakeControl

The player's independent brake control. Ranges from 0 to 1.

EngineBrakeControl

The true independent brake control used by the physics model. Ranges from 0 to 1.

AWSReset

The safety systems acknowledge button.

Indicators

SpeedH

The hundreds digit on the speedometer display. -1 hides the digit.

SpeedT

The tens digit on the speedometer display. -1 hides the digit.

SpeedU

The ones digit on the speedometer display. -1 hides the digit.

ACSES_SpeedH

The hundreds digit on the ACSES speed limit display. -1 hides the digit.

ACSES_SpeedT

The tens digit on the ACSES speed limit display. -1 or 0 hides the digit.

ACSES_SpeedU

The ones digit on the ACSES speed limit display. The only valid values are 0, 5, and -1 (which hides the digit).

ACSES_SignalDisplay

The signal speed limit display.

Value	Meaning
8	Stop
7	Restricting
6	Approach
5	30 mph
4	45 mph
3	60 mph
2	80 mph
1	MAS

All other values extinguish all lamps.

ATC_Node

The ATC indicator light.

ATC_CutOut

The ATC cut out light.

ACSES_Node

The ACSES indicator light.

ACSES_CutOut

The ACSES cut out light.

ACSES_CutIn

The ACSES cut in light.

Sounds

ACSES_Alert

Plays a continuous, rapid beep-beep sound.

ACSES_AlertIncrease

Plays a short upgrade tone.

ACSES_AlertDecrease

Plays a short downgrade tone.

ExteriorSounds

Plays some background noise.

VirtualRPM

Plays the range of diesel engine sounds.

Miscellaneous

VirtualEmergencyBrake

The emergency brake lever.

EmergencyBrake

The true emergency brake state used by the physics model.

FuelPump

The fuel pump indicator light.

HEP

The HEP switch. The default state is 1 (on).

UnitT

UnitU

Sets the digits of the unit number in the center pillar. The "45-" digits at the beginning of the number are static textures.

WindowLeft

WindowRight

The positions of the openable windows, from 0 (closed) to 1 (open).

Keyboard shortcuts

AWSWarnCount

The exclamation mark indicator on the HUD.

ATC

The Ctrl+F ATC on/off toggle. The default state is 0.

ACSES

The Ctrl+D ACSES on/off toggle. The default state is 0.

DoorsManual

The Ctrl+Shift+T manual doors on/off toggle. The default state is 0.

DoorsManualClose

The Ctrl+T manual doors close button. Value resets to 0 after one frame.

WipersInt

The Ctrl+V interminnent wipers toggle. The default state is 0.

VirtualStartup

The Z engine start/stop toggle. The default state is 1 (run).

PowerSwitch

The Y change power button. Value resets to 0 after one frame.

PowerSwitchAuto

The Ctrl+Y automatic power change toggle. The default state is 0 (off).

Destination

Cycles up/down with the Ctrl+Shift+5 and Ctrl+Shift+6 keys.

Value	Destination
1	Trenton
2	New York
3	Long Branch
4	Hoboken
5	Dover
6	Bay Head

Model nodes

ditch_left

ditch_right

The ditch lights.

LightsYellow

LightsBlue

LightsGreen

The external brake indicator lights.

Lights

CabLight

The cab dome light.

DeskLight

The control desk light.

DitchLight_Left

DitchLight_Right

The ditch lights.

Animations

Pantograph

Raises the pantograph. The duration is 2 seconds.

Fans

Spins the exhaust fans.

Consist messages

10100

Communicates the currently displayed destination sign to the passenger coaches. The argument is the ID of the destination.